6 Layer PCB

What Is A 6 Layer PCB Board?

A six-layer PCB refers to 4 Layer PCB that has two more signal layers added between the planes. The framework of a six-layer PCB includes four routing layers in which there are two external layers and two internal layers. Moreover, two internal planes are present, one for the ground and another to power the 6-layer PCB board. Above all, it improves the EMI significantly by offering two buried layers for fast speed signals and two surface layers for directing low-speed signals. Additionally, layers should always be close to adjacent planes.

Types of 6 Layer PCB Stack Up

There are various types of six-layer PCB Stack up and you can also configure the stack by yourself. However, we will be going to tell you the best type or the top configuration, which will be the best, suited for your electronic component. The most regularly utilized, six-layer PCB stack up in PCB configuration is to put the internal signal layers in between the stack up. On the other hand, 6 Layer PCB thickness also matters. So the configuration is as follows:

Top Signal
Ground Plane
Inner Signal
Inner Signal
Power Plane
Bottom Signal

The arrangement of a 6-layer stack up gives a PCB the best signal and execution. However, it is not the one that is regularly used. Then, the signal layers are reduced to three layer, including an extra ground layer:

The Top Signal
Ground Plane
Internal Signal
Power Plane
Ground Plane
Bottom Signal

This is the top-level configuration of your component.

Design Tips and Layout on Six Layer PCB

Here are some crucial and essential tips that will make your 6 Layer PCB design simple. The general tips that will prove beneficial for you. Here are some tips in details.

1. the most significant point is when you are designing a 6-layer PCB board, make sure the nodes of the board are accessible and approachable to the wires. To make the board easy to use.

2. Giving some space between the components to make the board accessibility user-friendly. Another thing, place the components of the same orientation on the board.

3. Furthermore, the most important thing in my point of view is to place the bypass capacitors in the components and route the differential signal traces in parallel. This will increase the performance of your component.

4. Moreover, exchange wiring directions between the layers

More importantly, always print the layout to that the sizes of the components match. On the contrary, you will face some serious problems in the future.

Choose the Right 6 Layer PCB Manufacturer

Not everyone in the market who is manufacturing six-layer PCB is the best PCB manufacturer available. Therefore, you should always choose the best manufacturer because your component needs the best. In any case, choosing or picking such PCB manufacturer for your hardware is not easy since huge numbers of makers are available.

I will certainly say that we are the best in the 6 Layer PCB manufacturing market so choose us. I am not saying this without any facts I have some solid reasoning behind this statement. The advantage of choosing us is we never compromise on the quality of the PCB. Besides, we make sure that the PCB board has all the right dimensions and all holes are precisely and accurately drilled. Furthermore, we will pass the 6-layer PCB board through some tests to check its quality and working. We can meet the customer requirements as well as we always complete the work in a given timescale.

In conclusion, these were some commonly asked questions about the 6 Layer PCB user. I hope this will help the user to understand it more easily.

If you have some questions, let us know by commenting below.

Scroll to Top