Welke apparatuur wordt gebruikt door professionele PCB-fabrikanten??

This month we plan to find a proper suppliers to produce PCB for our new products, a healthcare watch. One of our supplier assessment items is about production equipment, which I know few about them. Can you share some common equipment which professional factory may use?

Professional PCB manufacturers use following equipments

  1. Drilling Machines
  2. Multilayer Pressing machines for layer bonding
  3. Multilayer Soft Plate for Drilling
  4. De -burring to clean the drill dusts
  5. Imaging line for Transferring the design to Copper laminate by photolithography
  6. PTH Plating line with PLC for time control-based plating
  7. Etch and strip line for removing unwanted copper and remove image films
  8. Solder Masking line for protection screen Printing Coating
  9. Hot Air Leveling [ DINGEN} for tin-lead soldering / OR Tin soldering for ROHS components
  10. Bare Board-testen [BBT ], bed of nail testing or Flying probe systems
  11. Quality control systems in several stages
  12. Gold plating lines for sim, Edge connectors

#PCB-productie

https://www.youtu.be/B7Tiz36H00E?si=sG3ctwzuGCl_KbPW

Picture of Olivier Smit

Olivier Smit

Oliver is een ervaren elektronica-ingenieur met kennis van PCB-ontwerp, analoge circuits, ingebedde systemen, en prototyping. Zijn diepgaande kennis omvat schematisch vastleggen, firmware-codering, simulatie, indeling, testen, en probleemoplossing. Oliver blinkt uit in het omzetten van projecten van concept naar massaproductie met behulp van zijn elektrische ontwerptalenten en mechanische vaardigheden.
Picture of Olivier Smit

Olivier Smit

Oliver is een ervaren elektronica-ingenieur met kennis van PCB-ontwerp, analoge circuits, ingebedde systemen, en prototyping. Zijn diepgaande kennis omvat schematisch vastleggen, firmware-codering, simulatie, indeling, testen, en probleemoplossing. Oliver blinkt uit in het omzetten van projecten van concept naar massaproductie met behulp van zijn elektrische ontwerptalenten en mechanische vaardigheden.

Wat anderen vragen

Where should I store PCB?

I have received the final prototypes from manufacturer and all is good after our checking. And we want to keep it well. Do you have any tips about that?

Do you use SMT or THT for USB mini B connector?

This question is about the advisability of continuing to use a USB mini-B right angle surface mount connector in my pcb designs. On occasion we see one of these connectors peel back or delaminate off the pcb. Immediately the question is asked, why didn’t you use a through hole connector?

Lees gedetailleerd advies uit blogartikelen

Scroll naar boven