Is there any licensing restrictions of PCB components?

Let's say I plan on building a consumer electronic system, which would have a PCB and a plethora of various components,such as LEDs, transistörler, dirençler, vb. I would purchase these from a distributor or perhaps even directly from a manufacturer. Do I also owe royalties or other licensing-based fees for each of these components? What criteria/factors drive this answer?

Purchase of components implies either explicitly (through language in the datasheets) or implicitly a license. Başka bir deyişle, if someone sells you a component that allows you to do something, and then they sue you, they can easily be counter sued for entrapment. It would be silly for a manufacturer to go after you for using their own components.

The real concern is if you are using a component that infringes on someone’s else’s patents or IP’s. Then you need to discuss indemnification with them.

Devamını oku: A Beginner's Guide to SMD Components

#PCB Montajı #Consume Electronics

Oliver Smith

Oliver Smith

Oliver, PCB tasarımı konusunda yetenekli deneyimli bir elektronik mühendisidir, analog devreler, gömülü sistemler, ve prototipleme. Derin bilgisi şematik yakalamaya kadar uzanıyor, cihaz yazılımı kodlaması, simülasyon, Yerleşim, test yapmak, ve sorun giderme. Oliver, elektrik tasarımı yeteneklerini ve mekanik yeteneğini kullanarak projeleri konsept aşamasından seri üretime geçirme konusunda uzmandır.
Oliver Smith

Oliver Smith

Oliver, PCB tasarımı konusunda yetenekli deneyimli bir elektronik mühendisidir, analog devreler, gömülü sistemler, ve prototipleme. Derin bilgisi şematik yakalamaya kadar uzanıyor, cihaz yazılımı kodlaması, simülasyon, Yerleşim, test yapmak, ve sorun giderme. Oliver, elektrik tasarımı yeteneklerini ve mekanik yeteneğini kullanarak projeleri konsept aşamasından seri üretime geçirme konusunda uzmandır.

Başkaları Ne Soruyor?

What equipment is used by professional PCB manufacturers?

This month we plan to find a proper suppliers to produce PCB for our new products, a healthcare watch. One of our supplier assessment items is about production equipment, which I know few about them. Can you share some common equipment which professional factory may use?

PCB'deki kurşunsuz lehim bağlantılarındaki siyah noktalar nelerdir??

Bir PCB prototipi yapıyorum, Chip Quik'i kullanarak “SMDSWLF.031, Sn96.5/ Ag3.0/ Cu0.5 lehim 2.2% temiz olmayan akı. I find that the black spots appears frequently in larger pads on my board. I wonder if it is because I left the soldering iron more time heating the solder and that burnt the flux. What is that black residue? Is that a sign of a bad joint or maybe bad soldering technique?

Why do some through-hole LEDs have flared leads?

I have worked with many through-hole LEDs over the years. I ordered a bunch for a personal project. I did not notice they have flared leads until I used them. I’ve never encountered these flared leads before. What is their purpose?

Blog Makalelerinden Ayrıntılı Tavsiyeleri Okuyun

Yukarı Kaydır