Can I use a hot glue to cover a PCB board to insulate it and prevent it from damage?

I want to DIY PCB board at home, but raw material is limited. Can I hot glue to cover a PCB board? Is it advisable to do that?

September 20, 2023

Not recommend. There are two proper methods to coat a PCB.

The first is via a conformal coating.
The other is potting epoxy.

Depending on your electronics casework, you may be able to fill with with non-conductive epoxy.
You have to be concerned about any cabling.
Once potted, your gear is unrepairable. You have to watch out for connectors.
If they will with epoxy, they won’t work any longer.
If the PCB is depending on cooling via the case, you can try heat-conducting, electrically insulating potting epoxy.

#PCB Manufacturing

https://www.youtu.be/vr34HkBPAcw?si=d-xOTm1ZQ8F5F3fb

Oliver Smith

Oliver is an experienced electronics engineer skilled in PCB design, analog circuits, embedded systems, and prototyping. His deep knowledge spans schematic capture, firmware coding, simulation, layout, testing, and troubleshooting. Oliver excels at taking projects from concept to mass production using his electrical design talents and mechanical aptitude.

Oliver Smith

What Others Are Asking

What are the black spots in lead-free solder joints on PCB?

I am prototyping a PCB, using Chip Quik’s “SMDSWLF.031, a Sn96.5/ Ag3.0/ Cu0.5 solder with 2.2% no-clean flux. I find that the black spots appears frequently in larger pads on my board. I wonder if it is because I left the soldering iron more time heating the solder and that burnt the flux. What is that black residue? Is that a sign of a bad joint or maybe bad soldering technique?

Oliver Smith December 1, 2023

What will be the role of a copper layer in a metal core PCB in thermal dissipation?

In the design of a power electronic PCB, I want to use a metal PCB for heat dissipation of a TO-220 package MOSFET. To do that I want to mount metal PCB on the MOSFET with the use of thermal paste and screw exactly like we do when we use heatsink for the same package. Should I leave the copper of PCB between MOSFET surface and dielectric of PCB or remove the copper surface and leave only the dielectric opening?

Oliver Smith December 5, 2023

How can I go about making temporary test connections in PCB while prototyping without soldering?

I recently ordered some PCB bits from a new supplier to assemble a widget. I want to make temporary connections between different PCBs, but am not convinced I want to solder and then desolder and resolder wires while I am testing and prototyping. Is there any tips for doing that?

Oliver Smith December 11, 2023

Can I use a hot glue to cover a PCB board to insulate it and prevent it from damage?

Oliver Smith

Oliver Smith

What Others Are Asking

What are the black spots in lead-free solder joints on PCB?

What will be the role of a copper layer in a metal core PCB in thermal dissipation?

How can I go about making temporary test connections in PCB while prototyping without soldering?

Read Detailed Advice From Blog Articles