PCB設計

Do I have to protect PCB from radio frequency reflection?

For low power devices, they are probably safe even if all the power is reflected. If you generate more power than you need then feed the output through an attenuator it will reduce the effects of any reflected power.

例如, a 6dB attenuation will reduce the forward power by a factor of 4, but any reflected power will be reduced by an additional factor of 4 on the return trip, which gives a factor of 16 reduction in any reflected power.

These effects can normally be ignored on low-power devices (VCOs, PLLs, 等等) that can tolerate operating into a mismatched load with no ill-effects. They don’t need any special protection.

For special-purpose devices, the datasheet will often have limits or recommendations to protect them.

閱讀更多: 電信電子製造

#PCB設計

奧利佛史密斯

Oliver 是一位經驗豐富的電子工程師,擅長 PCB 設計, 類比電路, 嵌入式系統, 和原型製作. 他的深厚知識涵蓋原理圖捕捉, 韌體編碼, 模擬, 佈局, 測試, 和故障排除. Oliver 擅長利用他的電氣設計才能和機械才能將項目從概念到大規模生產.

最近的帖子

  • PCB製造 & 集會

如何拆焊: 逐步指南 6 有效方法

The soldering of electronic components onto circuit boards is a very necessary step in PCB assembly. 然而,…

  • PCB知識

PCB 短路的原因及如何偵測?

Have you ever had your smartphone suddenly turn into a hand-warmer or stubbornly refuse to

  • 電子元器件

QFN 封裝終極指南: 結構, 類型, 好處

電子設備正在快速發展, 他們需要緊湊的設計和效率. Among many choices

  • PCB製造 & 集會

助焊劑: 它是什麼以及為什麼您需要它?

在PCB組裝過程中, 焊接是非常關鍵的一步. 透過焊接, 電子元件…

  • PCB知識

藍色電路板: 定義, 優點及製造

除了綠色PCB, the blue circuit board is the second most common type

  • PCB製造 & 集會

LPI阻焊劑整體介紹

本篇文章重點介紹LPI阻焊層的基礎知識, 例如它的定義,…