Home » Questions » PCB Design » What is the type C connector for on the PCB of solar bottle lamp?

What is the type C connector for on the PCB of solar bottle lamp?

I am a product manager and found that the solar lamps PCB made by our market competitor is configured type C connector. Why is there?

PCB Design
October 8, 2023

For cloudy days which there is few solar energy, you can have an option to charge the battery through type C port.

Oliver Smith

Oliver is an experienced electronics engineer skilled in PCB design, analog circuits, embedded systems, and prototyping. His deep knowledge spans schematic capture, firmware coding, simulation, layout, testing, and troubleshooting. Oliver excels at taking projects from concept to mass production using his electrical design talents and mechanical aptitude.

Oliver Smith

What Others Are Asking

How can I remove tenting on vias after assembly for debugging?

I have two BGA parts on a PCB, with a 32 bit wide bus with a few control lines and a clock line connecting them. Almost all of these traces are only on internal layers. There looks like a signal integrity problem on the bus. The good news is that the board only has parts on one side, and all the vias are through-all. Can anyone suggest good ways to remove the tenting over the vias so they could be probed with an oscilloscope, or at least be able to solder 30 gauge wire to them?

Oliver Smith December 1, 2023

Do you know the standard thickness of a copper layer on a PCB?

We visited a PCB factory. And find that there are copper boards with various thickness in their incoming materials warehouse. That’s cool. It is the first time we see that. How many standard thicknesses of a copper layer on a PCB?

Oliver Smith November 20, 2023

Is it possible to replace an automotive wiring harness with PCB?

Is it possible to replace an automotive wiring harness with PCB? For example, just have the cables attached on either end of the circuit to eliminate a bunch of messy cableage in between.

Oliver Smith October 11, 2023

What is the type C connector for on the PCB of solar bottle lamp?

Oliver Smith

Oliver Smith

What Others Are Asking

How can I remove tenting on vias after assembly for debugging?

Do you know the standard thickness of a copper layer on a PCB?

Is it possible to replace an automotive wiring harness with PCB?

Read Detailed Advice From Blog Articles

Microvia PCB: Design and cost consideration

Why Opt for Outsourcing PCB Design Services?

Things You Should Know before Starting Your PCB Design