Is solder mask a valid electrical insulator?

There is a copper pour over the entire top of the my PCB, which is part of GND net. It turns out that the surface mounted 1W LEDs I'm going to use have the heat slug connected internally to the LED's +ve terminal. Can I rely on the solder mask to insulate the +ve voltage (~3V ish) from GND? Long term?

PCB Assembly, PCB Design
December 7, 2023

No, I would not rely on a solder mask as an insulator, because it is very thin and can be nicked easily.

The key issue is going to be how to properly heat sink the LED without a good thermal connection to the heat slug. High-power LEDs usually want the heat slug soldered or thermally epoxied to a heatsink. This can be PCB copper, but since you stated that the PCB copper is connected to the GND net you can’t connect to it.

Oliver Smith

Oliver is an experienced electronics engineer skilled in PCB design, analog circuits, embedded systems, and prototyping. His deep knowledge spans schematic capture, firmware coding, simulation, layout, testing, and troubleshooting. Oliver excels at taking projects from concept to mass production using his electrical design talents and mechanical aptitude.

Oliver Smith

What Others Are Asking

How do PCB manufacturers prevent solder from entering vias during wave soldering?

I have some PCBs that were wave soldered but the vias still remain open, they are not filled nor plugged form what I can see. I do not see any solder on the annular rings of the vias either. How do they go about doing so?

Oliver Smith November 3, 2023

Is aluminium foil a good substitute for kapon tape when soldering?

I want to desolder a tiny surface mount button from the motherboard of a phone. There are a lot of similarly tiny components surrounding it that I do not want to damage with heat from the soldering iron. Can I use aluminium foil in lieu of kapton tape to protect these components?

Oliver Smith December 5, 2023

Why do my Bluetooth PCB fail to pair with Android 7.1 version but work properly with iphone?

It’s detecting equipment, Bluetooth emergency alarm. Mobile application for activation button via Bluetooth can not work properly on Android 7.1. If i use iPhone all is ok. Why?

Oliver Smith October 13, 2023